Regimen Servicing Of The Glove Box

From The Bunny Wiki
Jump to navigation Jump to search

Etelux reminds you that in addition to the regular inspection of the glove box, the day-to-day upkeep get the job done of the glovebox is also needed

one. Right before and right after each individual operate, initially cleanse the atmosphere to make the ground dry and cleanse. Then cleanse the machines, including the internal and outer surfaces of the glove box, the observation procedure, the do the job floor, and so on., to be no cost of debris and cleanse.

two. Very carefully report the h2o, oxygen content, and gasoline intake of the equipment in the Glove Box Accessories box every working day to stay away from inadequate gas strain and cause the machines to end running.

three. Fork out notice to the quantity of gas in the working fuel cylinder at any time and replace it in time.

four. In scenario of ability failure, push the "vacuum pump" button on the panel to make the vacuum pump operate following electrical power on


5. Take note: Just after electric power on, if there is a dilemma that it simply cannot get started, the possibility is that the vacuum pump power cable is loosely related. The 2nd explanation is that the vacuum pump’s own swap is not turned on


six. When you want to put the sample into the glove box, use a tiny transition chamber as substantially as possible. Just before opening the transition doorway, spend interest to whether the tension gauge pointer on the valve cavity is at the zero position. If it is, you can open it right if not, you require to transform the change beneath the valve cavity to the "filling" placement to allow the gasoline enter the glove box changeover compartment, and then transform the swap back again to the intermediate position, then you can open the transition compartment Put the sample in the door, and then shut the door. When placing samples, be thorough not to touch the inner wall of the transition chamber with your hands, don gloves to pick and position the sample



Accomplishing these regime upkeep tasks can lower the decline level of the glove box, extend the service existence of the glove box, and also lower the incidence of accidents